Instruments that extend the surgeon's hand
Our quality assurance
- ISO 13485Medical device quality management
- CEMDR 2017/745 conformity
- ISO 9001Quality management system
- ÜTSTurkish product tracking registry
About Safir Surgical Instruments
Surgeons who value their craft want to work with the best hand instruments; the ergonomics and superior precision of a quality instrument create an unmatched feel. We understand what it means to transmit the sensation of tissue contact to the surgeon's fingertips.
With mastered craftsmanship, uncompromising raw materials and production processes, and attention to every single detail, we exist to build the very best light, slim, strong and durable hand instruments for the very best surgeons and their patients.
Read our storySurgical instruments crafted for every specialty
We have the capacity to produce approximately 15,000 different instruments for human and veterinary surgery, grouped into six main specialties. If you cannot find the instrument you need, we manufacture it from your drawing.
Microsurgery Instruments
Titanium micro needle holders, scissors and forceps finished to 0.1 mm tip accuracy.
- Micro needle holder
- Micro scissors
- Micro forceps
- Vessel clamp
Ophthalmology
Ultra-light eye surgery instruments for cataract, vitreoretinal and eyelid procedures.
- Capsulorhexis forceps
- Vannas scissors
- Speculum
- Cannula set
ENT & Rhinoplasty
Rasps, osteotomes and forceps with ergonomic grip for nose, ear and throat surgery.
- Osteotome
- Rasp
- Nasal speculum
- Turbinate scissors
Orthopaedics & Trauma
High torque raspatories, retractors and bone chisels with hardened steel edges.
- Bone chisel
- Raspatory
- Retractor
- Luer rongeur
General Surgery
The operating room essentials: scissors, needle holders, forceps and clamps, fully autoclavable.
- Metzenbaum scissors
- Mayo-Hegar holder
- Kocher clamp
- Retractor
Cardiovascular
Long-shaft vascular and cardiac instruments with atraumatic jaw geometry.
- DeBakey forceps
- Satinsky clamp
- Vascular scissors
- Sternum retractor
We know the details that make an instrument “good”
From jaw closure to weight balance, every dimension is designed to increase the surgeon's comfort during operations.
Certified raw material
German 1.4021 / 1.4034 stainless steel and ISO 5832-2 titanium, with material certificates and batch traceability.
Hand-finished precision
CNC-shaped bodies are ground, adjusted and tested by master craftsmen. The jaw closure of every instrument is checked individually.
Ergonomics and balance
The centre of gravity is calculated for the surgeon's fingertips, reducing fatigue during long procedures.
Lifetime service
Sharpening, adjustment, passivation and refurbishment. Every Safir instrument is restored to its first-day performance.
Autoclave resistance
Passivated surface tested for 3,000+ cycles at 134 °C steam sterilisation; resistant to corrosion and staining.
Custom manufacturing
From prototype to series production based on your drawing or sample, with hospital-specific sets and laser marking.
Five steps from raw material to the operating room
From forging to passivation, every process runs in our own facility in Antalya, keeping full batch traceability.
- 01
Raw material & forging
Certified steel is hot-forged in instrument-specific dies, aligning the grain structure for strength.
- 02
CNC machining
Jaw, serration and joint geometry are machined to micron tolerances on 5-axis machines.
- 03
Heat treatment
Hardening and tempering in vacuum furnaces; every batch passes a hardness (HRC) test.
- 04
Hand finishing & assembly
Grinding, adjustment and closure testing by master hands. This is where the instrument's feel is born.
- 05
Passivation & final control
Chemical passivation, laser marking and a 100% functional check before packaging.
Feedback from the operating room
The experience of surgeons and OR teams who use our instruments every day sits at the centre of our product development.
“The closure feel of the micro needle holders matches imported equivalents. My hand does not tire during long cases.”
“We have used the same set for eight years; after the sharpening service the instruments cut like new again.”
“The custom-tip rasp we requested was prototyped within two weeks. That speed is a major advantage.”
What surgeons ask about our instruments
Clear answers to the most common questions about materials, sterilisation, maintenance and lead times.
Where are Safir surgical instruments manufactured?
All Safir surgical hand instruments are manufactured in our own facility in Antalya. All processes, including forging, CNC machining, heat treatment, handcrafting, and passivation, are carried out under one roof; this allows every instrument to be traceable back to its raw material batch.
What materials are used in the instruments?
In standard instruments, German-origin 1.4021 and 1.4034 martensitic stainless steel is used, and in applications requiring microsurgery and non-magnetism, ISO 5832-2 pure titanium is used. A tungsten carbide (TC) tip option is offered for cutting edges.
Can instruments be sterilized in an autoclave?
Yes. All Safir instruments are suitable for 134 °C steam sterilization and have been tested for over 3,000 cycles. Thorough drying of instruments after sterilization and storing articulated instruments in an open position extends their lifespan.
Do you provide sharpening and maintenance services?
Yes. We offer sharpening, joint adjustment, spring replacement, passivation, and surface refurbishment services for all Sapphire-branded instruments. Instruments are subjected to a functional test after service and delivered with a report.
Do you produce custom-designed instruments?
Yes, we do. We prepare prototypes based on the surgeon's technical drawing, sample, or description, and proceed to mass production after approval. Laser marking and custom set configuration can be done on behalf of the hospital or surgeon.
Do you sell internationally?
For your distributorship, OEM cooperation, and international sales inquiries, you can reach out to our sales team; we evaluate your request within the same business day.
How long is the order and delivery time?
In-stock standard tools are shipped within 2-5 business days. For custom production and large set orders, the delivery time is typically 3-6 weeks; a precise date will be shared during the consultation phase.
Let's plan your set together
Reach our team for a specialty-specific instrument list, custom manufacturing requests, or maintenance and sharpening services. Requests are reviewed the same business day.
E-mail
[email protected]Factory
Çamköy, 21024. Sokak, No: 1/A, Aksu/Antalya
Working hours
Monday–Friday 08:30–18:00 · 24/7 e-mail support for export and distribution enquiries.